Motor mount for Trampa Vertigo / Ultimate Trucks with belt tensioner and motor/belt covers.

You need to use a CNC for the Motor Mount v2 Part, I used a 1/4inch aluminum (6061 grade)
Print the Mount base and truck ring in PETG, Pro PLA or better: Nylon Alloy 910.

I am using 3*1/4 inch threaded rods and Nylock bolts to strengthen the mount. On my latest version, I am using also tube/rods with an internal diameter of 1/4 inches and remove the covers (looks nicer to me and avoid small objects being trapped in the cover)

There are multiple parts composing my custom motor mount:

You will also need:

  • 2 x M4 45mm Hex Screws
  • 2 x M4 Spacers
  • 2 x M4 Nylocks Nuts
  • 3 x 1/4 inches threaded rods (approx 22cm)
  • 6 x 1/4 Nylocks Nuts

I am glad to share the files to the open-source community. Link to the Thingiverse page with the printable files: https://www.thingiverse.com/thing:2944212

Motor mount for Trampa Vertigo / Ultimate Trucks with belt tensioner and motor/belt covers.

You need to use a CNC for the Motor Mount v2 Part, I used a 1/4inch aluminum (6061 grade)
Print the Mount base and truck ring in PETG, Pro PLA or better: Nylon Alloy 910.

I am using 3*1/4 inch threaded rods and Nylock bolts to strengthen the mount. On my latest version, I am using also tube/rods with an internal diameter of 1/4 inches and remove the covers (looks nicer to me and avoid small objects to be trapped in the cover)

There are multiple parts composing my custom motor mount:

Motor mounts for Trampa Vertigo Trucks [V2 – Functional – Open Source]

You will also need:

  • 2 x M4 45mm Hex Screws
  • 2 x M4 Spacers
  • 2 x M4 Nylocks Nuts
  • 3 x 1/4 inches threaded rods (approx 22cm)
  • 6 x 1/4 Nylocks Nuts

I am glad to share the files to the open-source community. Link to the Thingiverse page with the printable files: https://www.thingiverse.com/thing:2944212

Version History:

If you like it, support me and pay me a beer on Paypal!